0.438 in. ID 0.500 in. OD 1.172 in. Long Brass Spacer - AndyMark, Inc

Brass spacer good for use over 3/8 in. hex shaft

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

0.192 in. ID 0.500 in. OD 0.813 in. Long Nylon Spacer - AndyMark, Inc

0.192 in. ID 0.250 in. OD 1.746 in. Long Brass Spacer - AndyMark, Inc

Mixed Hex Spacer Kit - AndyMark, Inc

0.313 in. ID 0.438 in. OD 0.438 in. Long Aluminum Spacer - AndyMark, Inc

0.500 in. ID 1.125 in. OD 0.570 in. Long Polypropylene Hex Bore Spacer - AndyMark, Inc

0.438 in. ID 0.500 in. OD 1.172 in. Long Brass Spacer - AndyMark, Inc

0.5 in. Hex Aluminum Spacer Stock - AndyMark, Inc

0.500 in. ID 1.125 in. OD 0.570 in. Long Polypropylene Hex Bore Spacer - AndyMark, Inc

Spacers are designed to hold components a set distance away from other components. This spacer has a 0.406 inch inside diameter, 1.000 inch outside

0.405 in. ID 1.000 in. OD 0.438 in. Long Nylon Spacer

Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

This is a plastic shoulder spacer. It is a spacer with a flange on one end. It is particularly usefull for turning a 1/2 in. round bearing into a 3/8

0.375 in. ID 0.500 in. OD 0.320 in. Long Nylon Shoulder Spacer

0.330 in. ID 0.470 in. OD 1.180 in. Long Nylon Spacer - AndyMark, Inc

0.313 in. ID 0.438 in. OD 0.188 in. Long Aluminum Spacer - AndyMark, Inc