Black Brass Hex Extender – Mofo Rc

Easiest way to widen the vehicle and add some low down weight. Black Brass +5mm Hex Extender axle Weights, 12gram weight each, Widens stance 10mm total per axle. You can also use these with the +4mm Axles for a total of 18mm of width. Fits almost all wheels even the ones with bolts in the rear. Beautiful coated Brass.
Easiest way to widen the vehicle and add some low down weight. Black Brass +5mm Hex Extender axle Weights, 12gram weight each, Widens stance 10mm total per axle. You can also use these with the +4mm Axles for a total of 18mm of width. Fits almost all wheels even the ones with bolts in the rear. Beautiful coated Brass. Use a drop of blue lock tite on the barrel nut. Don't overtigten. Make sure you can freely move the tire forward and backwards when installed with almost zero force. These do not work with the +4mm Extended Heavy Hex Axles. You will need either the Cvd +4s or the Brass Patty style +4s 

Brass – Mofo Rc

INJORA RC Hex Hub 12mm Brass Wheels Hex Hub Extension Hex Drive Adapter for 1/10 RC Crawler Axial SCX10 90046 D90 (15mm) : Toys & Games

This is the Steering link for the Trx4m made in brass and coated Black. It weights appx 11g and adds it right at the front and down low. These operate

Trx4-m Black brass Steering link

The +3mm weighted hex extender for the Trx4-m weighs in at 9 grams and adds 3mm of extra wheel offset for a wider +6mm total stance. Get a little bit

Trx4m Weighted Brass +3mm Hex Extender

Scx24 Comp Builds

Easiest way to widen the vehicle and add some low down weight. Black Brass +5mm Hex Extender axle Weights, 12gram weight each, Widens stance 10mm

Black Brass Hex Extender

For Axial SCX24, 4PCS Black Brass Extended Wheel Hex ExtendersNote: We have changed the nut from a 5mm width to a 4mm width on 20 April 2023 to be

INJORA 4PCS Black Brass Wheel Hex Hub +5mm Extenders for Axial SCX24 AX24

Builder's Notes: Jaws II the Sequel… a Shark so nice I HAD to build it twice! (Finally Done!)

/images/brass%20hubs%205.jpg