159F-6-6 Dixon Valve Brass SAE 45 deg. Flare Fitting - 45 deg. Elbow - — HoseWarehouse

$ 2.99 · 4.7 (549) · In stock

159F-6-6 Dixon Brass SAE 45 deg. Flare Fitting is a 45 deg. Elbow, and has a 3/8" Tube Size x 3/8" Pipe Size. The economical fitting resists mechanical pullout, and is manufactured especially for hard to hold liquids and gases.

Features:
Reference SAE 010302. Economical fitting resists mechanical pullout. Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection. Manufactured from CA 360, CA 345, or CA377 brass. Manufactured especially for hard-to-hold liquids and gases.
Specifications:
Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards). Temperature range: -65 deg. F to 250 deg. F Working Pressure Ranges: Temperature and type of tubing used are important factors, the table below is a good guide for proper selection. The PSI rating given is based on a temperature of 73 deg. F using copper tubing.
Assembly Instructions:
Cut tubing squarely and clean tube end thoroughly to remove burrs. Place nut onto tube. Place threaded end of nut toward end of tube. Flare tube end with flaring tool to provide 45 deg. flare. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal.

Working Pressure Ranges:

PSI	Tube OD	Tube Wall
1400	1/4	.030
1000	3/8	.032
750	1/2	.032
650	5/8	.035
550	3/4	.035

Part Number	Tube Size	Pipe Size	Straight Thread	PSI	Min/Max Temp	Material	Weight (Lbs)
159F-4-4	1/4	1/4	7/16-20	1400 (95.24 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.0700
159F-6-4	3/8	1/4	5/8-18	1000 (68.03 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.0950
159F-6-6	3/8	3/8	5/8-18	1000 (68.03 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.1000
159F-8-4	1/2	1/4	3/4-16	750 (51.02 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.1200
159F-8-6	1/2	3/8	3/4-16	750 (51.02 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.1250
159F-8-8	1/2	1/2	3/4-16	750 (51.02 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.2300

Anderson Metals-04095-0606 Brass Tube Fitting, 45 Degree Elbow, 3/8 Flare x 3/8 Male Pipe: Flared Tube Fittings: : Industrial & Scientific

Dixon 159F-6-6 Brass SAE 45° Elbow Flare Fitting, 3/8 Tube, 3/8 Pipe, 5/8-18 Straight: : Industrial & Scientific

Push-on fittings are intended for use with lok-on (push-on style) hose only Made of brass No hose clamps or ferrules are needed Dual angle seat

Dixon 287-0812 Brass 45 Degree SAE/37 Degree JIC Swivel Push On Fitting, Adapter, 3/4-16 UNF Female x 1/2 Hose ID Barbed

SAE 45 Degree Brass Fittings

Features: * N/A, Part Number, Hose ID, UNF Thread, Material, Weight, (Lbs), 144-0306, 3/16, 3/8-24, Brass, 0.0200, 144-0410, 1/4, 5/8-18, Brass, 0

1440410K (144-0410) Dixon Valve Brass Female 45 Deg. SAE Swivel x Hose Barb - 1/4 Hose ID - 5/8-18 UNF Thread

Parker's economical inverted flare fittings offer a metal-to-metal seal that is internal to the fitting for tighter tube bends. These fittings are

Brass Inverted Flare Fittings

249IFHD-5-2 - Male Elbow 249IFHD–249IF REF. SAE 040202

401-6B Aeroquip by Danfoss Female SAE 45° Swivel 100R5 Reusable Hose — HoseWarehouse

45° Flare Fittings

SAE 45° Flare Male Connector

SAE 45° Flare 45° Elbow

Dixon 159F-8-6-pk5 SAE 45 Degree Elbow Flare Fitting 1/2 Tube, 3/8 Pipe, 3/4-16 Straight (Pack of 5): : Industrial & Scientific