Ultratech Dry & Seal Flex Waterproof Coating, 1Kg at Rs 250/kg in Gurgaon
$ 23.00 · 4.7 (795) · In stock
Shivam Trading Company - Offering Ultratech Dry & Seal Flex Waterproof Coating, 1Kg at Rs 250/kg in Gurgaon, Haryana. Also find Waterproof Coatings price list | ID: 27450243797
DescriptionUltraTech Seal & Dry Flex is a two component, cement-based, styrene acrylic polymer-based flexible, waterproof coating incorporated with high quality polymer additives and fillers for all positive side waterproofing applications. Features & BenefitsConsistent quality made using high quality polymers, additives and fillers No water curing .Strong adhesion to substrateConvenient to applyFaster completion of workNegligible wastage due to higher pot lifeBrush application consistencyHigh positive side waterproofing abilityNon-toxic50% elongation at tensile force of 50 Kg/sq.cm Areas of ApplicationUltraTech SEAL & DRY FLEX can be used for positive side waterproofing of terraces, sloping roofs, RCC water tanks, balcony, domes. It can be used effectively over concrete surfaces, marble and granite bottom areas, it's ideal for old and new surfaces of any geometry. Highly recommended for waterproofing of areas less than 10,000 sq.fSurface Preparation Prepare the surfaces before the UltraTech Seal & Dry Flex application by removing oil, bond inhibiting agents, dirt, dust and laitance The cleaning can be carried out with suitable methods like using wire brush, water jetting, mopping, etc.Use suitable crack filler to fill the non-structural cracks, if any, on the surface prior to application of UltraTech SEAL & DRY FLEX If any structural related issues are noticed, care to be taken to attend the same before waterproofingUse UltraTech MYKROFILL for pressure grouting of weak/honeycombed areas prior to application of UltraTech SEAL & DRY FLEX Application of UltraTech SEAL & DRY FLEX has to be carried out with recommended surface preparations to ensure the optimum product performanceRapid setting water plug material to be used to stop running water leakages before waterproofing application Mixing • In a mixing vessel, slowly add the powder component into the liquid component and continuous stirring to be done by using mechanical stirrer for 2-3 minutes to ensure a consistency free of lumps • Mix only the required quantity in the set proportion (2 part powder + 1 part liquid) which is consumed within the 2 hours pot life period and as per the requirement for total area of treatment Application • Use soft bristle brushes to apply UltraTech SEAL & DRY FLEX to have uniform and required thickness in 2 coats, one perpendicular to the other. Second coat can be applied after a minimum gap of 24 hours during normal climatic conditions • Average thickness of each coat should be in the range of 0.4-0.5 mm DFT and number of coats may be increased to achieve higher thickness as per the demanding application area • It is recommended to adopt a sandwich/underlayment system of application if UltraTech SEAL & DRY FLEX is applied in exposed areas like roofs and terraces • UltraTech FLOORKRETE with 8 mm down aggregate 1:1 mix ratio as top screed is recommended over UltraTech SEAL & DRY FLEX coated areas for enhanced life • UltraTech SUPER STUCCO is suggested as top screed over domes and sloped roofs for screed
Ultratech Dry & Seal Flex Waterproof Coating, 1Kg at Rs 250/kg in Gurgaon
Ultratech Dry & Seal Flex Waterproof Coating, 1Kg at Rs 250/kg in Gurgaon
Ultratech Dry & Seal Flex Waterproof Coating, 1Kg at Rs 250/kg in Gurgaon
Ultratech Dry & Seal Flex Waterproof Coating, 1Kg at Rs 250/kg in Gurgaon